Peeling tester
The S-PRT-2500 is used to perform the peel strength test. More specifically, it tests the bond between the adhesive/PE (or PP) top coat layers and the FBE layer.
Advantages:
- Completely wireless connections
- Highly compatible and mobile device
- Peeling test results are automatic generated in a report according the selected standard
- Highly accurate in peeling speed and force
- Automatic correction in order to maintain 90° peeling angle
- Test results can be transferred by USB connection port, LAN or WiFi
How It Works:
The peel strength test measures the force required to peel the top coating from the pipe at a constant pull rate.
The Full Scope:
- Peeling device
- Control unit (tablet)
- Hardcover case
Product Range:
Maximum peeling force : 2500N
Peeling length : between 90 and 140 mm, depending on type of requirement
Sample width : 20 – 50 mm
Maximum sample thickness : 10 mm
Pipe diameter range : 4½” (114.3 mm) and larger
Peeling speed : 10 mm/min
The S-PRT 2500 can be used in accordance with the various standards;
– DIN 30670:2012-04 (PE) – Annex D / Figure D.2
– DIN 30678:2013-09 (PP) – Annex D / Figure D.2
– ISO 21809 – 1 (July 2011) – Annex C / Procedure 3.3 / Figure C.2
Filterable Properties:
At Selmers, we specialize in advanced industrial machinery and automation for coating and handling pipes and tubes. With over 50 years of experience, we have grown into a trustworthy supplier of numerous automated solutions. Collaboration is key to creating real magic. Interested in optimizing performance and reducing risks?
