Pipe Cleaning Systems (General)

Selmers recognizes that the cleaning process has a huge impact on the coating quality, so we are constantly striving to perfect the process. Advantages: Proven track record in factories maintaining the highest quality standards Reliable equipment Efficient to use Built to enhance the pipe coating process   How it Works As part of the cleaning […]

Brushing Unit

For more information on this topic contact sales@selmers.com

Sanding Unit

For more information on this topic contact sales@selmers.com

Robotic Pipe End Brushing and OOR (“The Predator”)

This solution was developed in close cooperation with a customer. They process countless individual pipes off-shore into one long pipeline that is then sunk onto the seabed. Before the pipes can be welded together in the so-called prep area on a ship, the end caps must be removed.  After that, the surface is treated in […]

Field Joint (FJ) Blaster

Spread all over the world, a lot of different types of Selmers pipe blasters work successfully; for external and internal pipe coating plants, field joint blasters suitable for S-lay & J-lay vessels, for spoolbases or cross-country usage. Selmers has designed for onshore pipeline construction or spoolbases, a standard program of field joint blasters in 3 […]

External Blasting & Coating Plant

The Full Scope: External Blasting Equipment: Blasting Conveyor Pre-Heating System (gas-fired / induction) External Blasting System Dust Removal Brush System (Chemical) Treatment Equipment External Pipe Wash System (Alkaline) Chromate Application System Phosphoric Acid Wash System High Pressure Pipe Wash System External Coating Equipment Coating Conveyor Heating System (gas-fired / induction) Tape Application Unit External Coating […]

Internal Blasting System

In the internal mechanical blasting process the pipe surface is blast cleaned with dry-grit using a blast boom system. A highly concentrated stream of steel abrasive particles are projected at the surface. The goal is to remove rust, mill scale and contaminations in order to create the correct cleanness and surface roughness profile, beneficial for coating adhesion. […]

Field Joint (FJ) Blaster

Spread all over the world, a lot of different types of Selmers pipe blasters work successfully; for external and internal pipe coating plants, field joint blasters suitable for S-lay & J-lay vessels, for spoolbases or cross-country usage. Selmers has designed for onshore pipeline construction or spoolbases, a standard program of field joint blasters in 3 […]

Robotic Process Solutions (General)

Nowadays robotics is an essential component in many modern manufacturing environments. They enable production processes to be faster, flexible, safer and more reliable. Selmers believes that each production facility, big or small, can benefit from the advantages of robotic process solutions. Selmers has developed a range of robotic solutions which are valuable for the pipe […]

Wind Tower / Monopile Coating Plant

Producers for wind turbines generally use a manual blasting and coating process. Selmers automates this process with a proven system, which increases the capacity, lowers the overall cost and improves the service life of a wind tower or monopile. A Selmers Wind Tower Coating Plant automatically pre-heats, blasts, washes and coats wind towers and monopiles […]