Pressure Rollers
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Adhesive Extruder
Produces the adhesive sheets that form the layer in a 3LPE/PP coating. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
FBE Powder Booth System (single / dual layer)
The Full Scope: Induction Heaters Fluid Beds Epoxy Big Bag Unloaders Hopper HDLV Pumps Epoxy Application Cabin incl. Guns Dust Filter For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
PE or PP Extruder (side & sleeve appl.)
Produces the PE/PP layer used for a protective coating. How it Works Granules of PE/PP are extruded onto the passing pipe, forming a solid coating layer. Side extrusion is most commonly used, where a sheet of PE/PP is wrapped around a pipe. For smaller diameter pipes, so-called sleeve/ring extrusion is a common process. For […]
Blasting Conveyor
The helix wheel system provides the accuracy required for high quality blasting results. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Phosphoric Acid Wash System
In order to obtain an as clean as possible pipe surface, pipes may be additionally “cleaned” after blasting. In the phosphoric acid wash cleaning process a carefully premixed acid solution is sprayed on the pipe with the goal to remove possible contaminations such as salts (chlorides and sulphates), light oxidation, oil traces, surface dust and/or […]
Dust Removal Brush System
The brush system is used to remove abrasive. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Coating Conveyor
The helix wheel system provides the accuracy required for high quality blasting results. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Internal Blasting System
In the internal mechanical blasting process the pipe surface is blast cleaned with dry-grit using a blast boom system. A highly concentrated stream of steel abrasive particles are projected at the surface. The goal is to remove rust, mill scale and contaminations in order to create the correct cleanness and surface roughness profile, beneficial for coating adhesion. […]
Internal Marking & Inspection Station
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: Internal Pipe Coating Plant
