The evolution of quality: goodbye to ‘50 shades of grey’

‘Measuring is knowing’ and that is only positive. As management you can steer on data, you can increase your OEE on the production floor and even win a grand prix with it. Also in the field of quality more and more things are measured and made visible in figures and graphs. Smoothing out rough edges […]

How to create ‘new gold’ from operating nearshore spoolbases

Selmers has been taking care of the development, engineering, manufacturing, installation and optimization of spoolbases for the handling of pipes for many years. This has already resulted in many optimisations and customer-specific solutions. We have translated a large part of these improvements and pieces of custom work into standard modular spoolbase equipment and process lines. […]

Indentation Tester

The indentation hardness tester is designed for testing the resistance of the coating to the indentation of an indentor. Advantages: The test equipment is designed according DIN 30670 and DIN 30678 Prepared to perform up to 5 tests Easy way to measure indentation of PE/PP with maximum sample dimension of 100 x 100 mm   […]

Mohawk Removal Unit

In the case of a coating mohawk we have a solution to remove the mohawk for a smooth and equalized surface.   For more information on this topic contact sales@selmers.com   This system can also be found as a part of the:  External Blasting &Coating Plant

External Blasting & Coating Plant

The Full Scope: External Blasting Equipment: Blasting Conveyor Pre-Heating System (gas-fired / induction) External Blasting System Dust Removal Brush System (Chemical) Treatment Equipment External Pipe Wash System (Alkaline) Chromate Application System Phosphoric Acid Wash System High Pressure Pipe Wash System External Coating Equipment Coating Conveyor Heating System (gas-fired / induction) Tape Application Unit External Coating […]

Inspection Station

We can upgrade the inspection station to the required extend, for example with a safety system in place or with automated station configuration. For more information on this topic contact sales@selmers.com   This system can also be found as a part of the:  External 3LPE/PP-5LPP Foam Pipe Coating Plant

Holiday Detection

By checking an electric circuit this non-destructive test can be used to detect pinholes and other discontinuities in the coating. For more information on this topic contact sales@selmers.com   This system can also be found as a part of the:  External 3LPE/PP-5LPP Foam Pipe Coating Plant

Robotic Process Solutions (General)

Nowadays robotics is an essential component in many modern manufacturing environments. They enable production processes to be faster, flexible, safer and more reliable. Selmers believes that each production facility, big or small, can benefit from the advantages of robotic process solutions. Selmers has developed a range of robotic solutions which are valuable for the pipe […]

Wind Tower / Monopile Coating Plant

Producers for wind turbines generally use a manual blasting and coating process. Selmers automates this process with a proven system, which increases the capacity, lowers the overall cost and improves the service life of a wind tower or monopile. A Selmers Wind Tower Coating Plant automatically pre-heats, blasts, washes and coats wind towers and monopiles […]

Subscribe to our Newsletter!

Search our Website

Find what you are looking for, by searching  the keyword(s) of your interest