Adhesive Extruder
Produces the adhesive sheets that form the layer in a 3LPE/PP coating. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
FBE Powder Booth System (single / dual layer)
The Full Scope: Induction Heaters Fluid Beds Epoxy Big Bag Unloaders Hopper HDLV Pumps Epoxy Application Cabin incl. Guns Dust Filter For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
PE or PP Extruder (side & sleeve appl.)
Produces the PE/PP layer used for a protective coating. How it Works Granules of PE/PP are extruded onto the passing pipe, forming a solid coating layer. Side extrusion is most commonly used, where a sheet of PE/PP is wrapped around a pipe. For smaller diameter pipes, so-called sleeve/ring extrusion is a common process. For […]
Phosphoric Acid Wash System
In order to obtain an as clean as possible pipe surface, pipes may be additionally “cleaned” after blasting. In the phosphoric acid wash cleaning process a carefully premixed acid solution is sprayed on the pipe with the goal to remove possible contaminations such as salts (chlorides and sulphates), light oxidation, oil traces, surface dust and/or […]
Dust Removal Brush System
The brush system is used to remove abrasive. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Internal Blasting System
In the internal mechanical blasting process the pipe surface is blast cleaned with dry-grit using a blast boom system. A highly concentrated stream of steel abrasive particles are projected at the surface. The goal is to remove rust, mill scale and contaminations in order to create the correct cleanness and surface roughness profile, beneficial for coating adhesion. […]
Internal Marking & Inspection Station
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: Internal Pipe Coating Plant
Internal FBE Coating System
An internal FBE coating is used to protect the inner surfaces of steel pipes from the influence of corrosion and light mechanical impacts and it provides excellent resistance to cathodic disbondment. How it Works The internal Fusion Bonded Epoxy (FBE) system is based on an epoxy powder spray system, mounted on a lance. The […]
Internal Pipe End (de-)Masking Station
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: Internal Pipe Coating Plant
Internal Liquid Epoxy / PU & Flow Lining
Internal liquid lining is a coating layer on an internal pipe surface to protect against corrosion or to optimize flow efficiency. There are multiple coating types available such as liquid epoxy, polyurethane (PU), or 2-component coating. How it Works After placing the pipe in the internal liquid coating station, the pipe ends are sealed […]
