Peeling Resistance Tester

The S-PRT-2500 is used to perform the peel strength test. More specifically, it tests the bond between the adhesive/PE (or PP) top coat layers and the FBE layer.

Advantages:

Completely wireless connections

Highly compatible and mobile device

Peeling test results are automatic generated in a report according the selected standard

Highly accurate in peeling speed and force

Automatic correction in order to maintain 90° peeling angle

Test results can be transferred by USB connection port, LAN or WiFi

How it Works

The peel strength test measures the force required to peel the top coating from the pipe at a constant pull rate.

The Full Scope:

Peeling device

Control unit (tablet)

Hardcover case

Maximum peeling force : 2500N

Peeling length : between 90 and 140 mm, depending on type of requirement

Sample width : 20 – 50 mm

Maximum sample thickness : 10 mm

Pipe diameter range : 4½” (114.3 mm) and larger

Peeling speed : 10 mm/min

The S-PRT 2500 can be used in accordance with the various standards;

– DIN 30670:2012-04 (PE) – Annex D / Figure D.2

– DIN 30678:2013-09 (PP) – Annex D / Figure D.2

– ISO 21809 – 1 (July 2011) – Annex C / Procedure 3.3 / Figure C.2

* other specifications upon request

Related Products

Find below other products that have at least one of the filterable properties of the solution that you are currently viewing. Maybe interesting to you as well?

Mohawk Removal Unit

Surface Cleanliness Tester (WA Clean)

Cathodic Disbonding Tester

Related Sharings

Find below articles that have at least one of the filterable properties of the solution that you are currently viewing. Maybe interesting to you as well?