Robotic De-Icing Plant
Due to outdoor storage during the winter pipes get covered with compact snow and ice which needs to be removed prior to load-out. Our solution ensures that the exterior of the pipes will be sufficiently clean of ice. Advantages: Safe and employee friendly No damage to high quality coatings High speed The Full Scope: […]
Robotic Pipe End Brushing and OOR (“The Predator”)
This solution was developed in close cooperation with a customer. They process countless individual pipes off-shore into one long pipeline that is then sunk onto the seabed. Before the pipes can be welded together in the so-called prep area on a ship, the end caps must be removed. After that, the surface is treated in […]
External Blasting & Coating Plant
The Full Scope: External Blasting Equipment: Blasting Conveyor Pre-Heating System (gas-fired / induction) External Blasting System Dust Removal Brush System (Chemical) Treatment Equipment External Pipe Wash System (Alkaline) Chromate Application System Phosphoric Acid Wash System High Pressure Pipe Wash System External Coating Equipment Coating Conveyor Heating System (gas-fired / induction) Tape Application Unit External Coating […]
Water Jetting Coating Cutter
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Counterflow Fan
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Pipe End Milling System
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Water Removal Station
For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Phosphoric Acid Wash System
In order to obtain an as clean as possible pipe surface, pipes may be additionally “cleaned” after blasting. In the phosphoric acid wash cleaning process a carefully premixed acid solution is sprayed on the pipe with the goal to remove possible contaminations such as salts (chlorides and sulphates), light oxidation, oil traces, surface dust and/or […]
Dust Removal Brush System
The brush system is used to remove abrasive. For more information on this topic contact sales@selmers.com This system can also be found as a part of the: External 3LPE/PP-5LPP Foam Pipe Coating Plant
Internal Blasting System
In the internal mechanical blasting process the pipe surface is blast cleaned with dry-grit using a blast boom system. A highly concentrated stream of steel abrasive particles are projected at the surface. The goal is to remove rust, mill scale and contaminations in order to create the correct cleanness and surface roughness profile, beneficial for coating adhesion. […]
