Wind Tower Blast System
The Wind Tower Blast System is designed to blast wind tower cones automatically and mechanically, all with the purpose to remove rust and contaminations and create a correct surface roughness for further treatment. Advantages: Quick Return on Investment (ROI) Cost reduction: low labour, low energy and low consumption of abr Minimum production time, internal and […]
Transportable Blast & Coat System
The transportable blast and coat system is designed for external blasting and coating of steel pipes. This process is normally done by high investment machines with a long changeover time when it comes to switching pipe diameters. Such machines are designed to process large batches of pipes. Selmers is able to offer a system having […]
Robotic Coating Thickness Measurement System
The Robotic Coating Thickness Measurement (CTM) measures SFBE, DFBE, 3LPE/PP and liquid coatings. Individual layer thicknesses, as well as total thickness at critical spots like seam tops can be monitored and reported continuously. The robot will be installed in the external coating application area. The results of the measurement are displayed on a monitor for […]
Robotic Blasting System
Robotic blasting systems bring a new level of automation to the joint blasting process. By combining a closed loop vacuum blast system with a robot, a clean process with a continuous and even blast result is achieved. The system automatically detects the cutback area and pipe diameter. Based on this, it determines the path for […]
PP Foam Cutting System
After a pipe has been coated with PP foam, pipe end cleaning is necessary to create cutbacks and a chamfer. The PP foam cutting system removes the PP foam over a predetermined length in order to create the chamfer. Advantages: High accuracy Different options for profile settings Compatibility with existing processes Sustainable High performance How […]
Portable Tower Coating Repair System
The Portable Tower Coating Repair System is a multi-purpose portable wind turbine maintenance device that can be outfitted with multiple attachments used to inspect, clean, blast, and coat towers for wind turbines. Advantages: Provides a low-cost alternative as compared to conventional repair methods Low mobilization and demobilization costs Quick assembly time Automated systems eliminate the […]
High Performance Blast Wheel℗
In the internal mechanical blasting process the pipe surface is blast cleaned with dry-grit using a blast boom system. A highly concentrated stream of steel abrasive particles are projected at the surface. The goal is to remove rust, mill scale and contaminations in order to create the correct cleanness and surface roughness profile, beneficial for coating adhesion. […]
Fusion Bonded Epoxy (FBE) Application System
Epoxy powder has outstanding corrosion protection characteristics and is commonly used as a corrosion protection layer in several coating processes, e.g. single layer Fusion Bonded Epoxy (FBE), dual layer FBE, three layer PE/PP coating process, etc.. However, a similar system can also be used as an adhesive powder spray system instead of an extruded adhesive […]
External Blasting System
In the external blasting process the pipe surface is blasted inside a blast cabin. This with the goal to remove rust, mill-scale and contaminations in order to create a correct cleanness and surface roughness profile for further treatment. Advantages: Flat/shallow floor erection reducing investment in deep pits Rigid manganese steel blast cabin No pipe support […]
Internal Blasting & Coating Plant
Internal coating or lining of pipes is a common technology to protect steel pipelines against corrosion or to reduce flow friction. It is widely used in (long distance) transport lines for oil, gas, fuel, condensate, chemicals, potable- or industrial water, sewage, outfall pipes and drilling pipes. Depending on the transport medium, its aggressiveness and other […]
